So - 5'10" planing hull / simm / quad thing. :)
This is going to be a HWS board.
1) Spine/ribs are 6mm marine plywood.
2) Skins / rail strips are cedar -- the guys at Grain gave me a great price on this.
3) The fin setup is quad proboxes.
4) Glass will be 1x 4oz S glass deck and bottom cutlapped with a 4 oz deck patch.
5) Resin is RR CE for lam / fill coats.
Anyway - stoked to start up again!
Here is the spine/ribs glued down. Will be cutting them out tomorrow: