Tuesday, February 17, 2009

Grain Surfboard Construction Part 12

Installed the fin box this evening. This involved routing the hole for the tail where the backing was installed in the previous steps. The fin box is a 10.5 inch Fins Unlimited box and is installed by inserting into the routed hole in the bottom and glued in with an epoxy/sawdust mix.


4 comments:

  1. You should name your board the MWH.
    (Made With a Herring)

    ReplyDelete
  2. Write this on your board "Wood Rather Be surfing"

    ReplyDelete
  3. of course, if your board floats on water, we will have to burn it, cause, it is A WITCH!

    ReplyDelete
  4. I'm with Stinky... but, I do hope it floats.. M

    ReplyDelete